The motion system is the machine’s muscles. It is what moves the table, head, or end effector from point A to point B. This is typically done with signals from the controller sent to a to a driver, and that driver commanding a motor.
- 
  Steppers/Servos, Drivers, etc. 
 
  
  
 Troubleshooting Pages
- 
   Mill Gib/AC Bearing Adjustment and Backlash Compensation - PCNC 770 
- 
   Lost Motion Testing - PCNC 770 
- 
   Limit Switch Troubleshooting for PCNC 770 and 1100 
- 
   Ballscrew Replacement 
- 
   Axis Movement is Noisy - PCNC 770 
- 
   One Axis Won't Move (or Only Moves in One Direction), and Other Axes Move - PCNC 770 
- 
   All Axes Won't Move When Commanded - PCNC 770 
- 
   Can't Reference All Axes - PCNC 770 
 
