The machine's spindle is driven by a servo motor controlled by the DR1 servo drive.
The spindle is in a ready-to-run condition when:
-
The control power is on.
-
The machine is reset.
-
The enclosure doors are closed.
-
The spindle brake resistor thermal switch isn't tripped.
To troubleshoot the spindle drive subsystem, read the following:
Troubleshooting Pages
-
The Spindle Won't Turn - 1500MX -
Machining Operations are Loud (Chatter) - 1500MX -
Can't Load or Unload a Tool, or the Spindle's Drawbar Drags Against the Power Drawbar Cylinder's Piston - 1500MX -
Spindle Rotates on Contact, or Spindle Isn't Rigidly Clamped -
Spindle Doesn't Orient Correctly or Consistently - 1500MX